T332 IB_US version Size: 178 x 178 mm (16 pages) Color: Black text on white paper Material: 90gsm book paper Jan.
P2 Table of Contents What’s in the Box................................................................................................................................................................1 Product Care ......................................................................................................................................................................1 Controls Overview ................................................................................................................
P3 Controls Overview Top Panel Alarm 2 Button Alarm 1 Button Minute/FWD Button Volume – / Volume + Buttons Hour/REV Button MIN ALM 1 ALM 2 VOLU ME R HOU M AL ODE M RE SE T K/ OC ET CLRES P Clock/Preset Button SNOOZE/SLEEP Power/Mode/ Alarm Reset Button Snooze/Sleep Display Dimmer Button Rear Panel * BT PAIR (Power cord not shown) Aux-in jack 2 Bluetooth Pairing Button FM Antenna
P4 Display When lit, indicates time displayed is PM When lit, indicates Buzzer, Radio or Bluetooth as Alarm 1 source. If neither is lit, Alarm 1 is not armed When lit, indicates linked Bluetooth device. Fast flashing indicates pairing attempt, slower flashing for linking attempt Time display BT BT When lit, indicates backup batteries should be replaced When lit, indicates Buzzer, Radio or Bluetooth as Alarm 2 source.
P5 Set Up Connecting to Power Source Connect the AC plug into a working wall outlet that is not controlled by a wall switch. The unit does not operate on batteries (the battery back up system maintains clock settings during power failures). AUX IN * BT PAIR BT BT Turning the Unit ON or OFF MODE ALM RESET MODE ALM RESET ON OFF 2 SECS • Press and release the Power/Alarm Reset/ Mode Button on the unit at any time to turn the unit On.
P6 2 CLOCK/ PRESET 2 SECS BT BT Press and hold the Presets/Clock Button until the time flashes on the display. 3 HOUR PM indicator BT BT Press and release the Hour/ Button to adjust the HOUR. NOTE: The PM indicator will light when the hour is set for PM. There is no AM indicator. 4 MIN BT Press and release the Minute/ 5 BT Button to adjust the MINUTES. CLOCK/ PRESET BT BT Press and release the Presets/Clock Button to complete time setting.
P7 Setting and Using Alarms This unit has two independent alarms, Alarm 1 and Alarm 2. Each is set and operates in the same way. Instructions below show Alarm 1. Follow the same method to set Alarm 2. 1 2 SECS BT BT Press and hold the Alarm 1 Button until “6:00” flashes on the display. 2 HOUR PM indicator BT BT Press and release the Hour/ Button to adjust the HOUR. NOTE: The PM indicator will light when the hour is set for PM. There is no AM indicator.
P8 4 BT BT Press and release the Alarm 1 Button to complete alarm time setting. SELECTING YOUR ALARM SOURCE/DISARMING THE ALARM Alarm set to Buzzer Set alarm to Buzzer BT Set alarm to Radio Alarm set to Radio BT Set alarm to Bluetooth BT Disarm alarm BT Alarm set to Bluetooth Alarm OFF (no indicator) Press and release the Alarm 1 Button repeatedly as needed to cycle to desired alarm mode: Buzzer (default), Radio (last AM or FM station played), Bluetooth or Off (alarm is no longer active).
SNOOZE Press and release the Snooze/Sleep Button when the alarm sounds to silence it for 9 minutes. Snooze can be used several times during alarm. SNOOZE/SLEEP Setting Up and Using Bluetooth PAIRING A BLUETOOTH DEVICE 1 BT BT Press and release the Power/Alarm Reset/Mode Button as needed to turn unit On and select Bluetooth mode. 2 * MUST FIRST ENTER BT MODE TO PAIR BT PAIR BT BT Press and release the BT (Bluetooth) Pairing Button located on the back of the unit.
P10 PLAYING BLUETOOTH AUDIO Once your device is paired, it will link with the device when within range (about 30 feet). 1 BT BT Press and release the Power/Alarm Reset/Mode Button as needed to turn unit On and select Bluetooth mode. 2 CLOCK/ PRESET Use the controls on your Bluetooth device to select music, control playback and adjust volume. You can also press and release the Presets/Clock Button as needed to Play and Pause Bluetooth audio from your device.
P11 Setting and Using the Radio BASIC RADIO OPERATION TIP: Extend FM antenna for best reception. AM 1 FM BT BT BT BT Press and release the Power/Alarm Reset/Mode Button as needed to turn unit On and select AM or FM radio band. 2 MIN HOUR OR Press and release the Hour/ Button or Minute/ Button to tune radio to a desired station. Press and hold to seek the next clear station. 3 OR Press and release the Volume - Button or Volume + Button to adjust radio volume.
P12 PRESET RADIO SETTING AND OPERATION SETTING RADIO PRESETS This unit will store up to 20 station presets, 10 AM and 10 FM. 1 AM BT BT FM BT BT Press and release the Power/Alarm Reset/Mode Button as needed to turn unit On and select AM or FM radio band. 2 MIN HOUR OR Press and release the Hour/ Button or Minute/ Button to tune radio to a station you want to assign to a preset. Press and hold to seek the next clear station.
P13 5 Press and release the Presets/Clock Button to confirm the preset number (P01 - P10) you want to assign to the current station. Continue steps 1- 4 to set all desired presets. CLOCK/ PRESET PRESET RADIO OPERATION To listen to a preset at any time, press and release the Presets/Clock Button as needed to select the desired preset station. Using Aux In Audio 1 AUX IN Mobile Phone PC/Tablet Game Devices iPod Laptop MP3/MP4 Connect a standard audio cable with 3.
P14 3 OR Control audio playback on your device, making sure output volume is turned up. If needed, press the Volume - Button or Volume + Button to adjust volume on the unit. Sleep Mode Sleep mode allows you to set the unit to turn off after a selected time interval. It allows you to fall asleep while listening to the radio or a device that is connected to the Aux In Jack. NOTE: It will power off the Timex unit, but it will not power off your AUX device.
P15 Dimmer SNOOZE/SLEEP 2 SECS Press and hold the Snooze/Sleep Button to toggle display brightness between high and low settings. Dimmer cannot be adjusted when alarm is sounding. Battery Cautions and Tips • Only use the recommended/supplied batteries or equivalent. • Use alkaline batteries for longer life. • Do not mix old and new batteries, and do not mix alkaline, carbon-zinc or rechargeable nickel-cadmium batteries. • Insert batteries with proper polarity (+/–) as indicated.
P16 IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
P17 Troubleshooting 1. The unit does not power ON. The unit is not connected to AC outlet, the AC outlet has no power, or is controlled by a wall switch that is “OFF”. Check AC outlet and wall switch. 2. Alarm does not come on. The alarm time AM or PM incorrectly set, Alarm was OFF, etc. Check alarm settings. 3. Low battery indicator is on. Batteries have not been installed correctly in the battery compartment or the batteries may be weak or exhausted. Try replacing batteries. 4.
P18 This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
