User Manual

guitaRF™ aSSEMBLY MaNuaL
sE Electronics guitaRF™ Assembly + Use
Thank you for purchasing an sE Electronics guitaRF! We hope it helps
make your records and live shows sound great, and makes recording
guitars & bass (and anything else!) that much easier for you.
STEP ONE
Screw the vertical standoff into the
bottom of the lter, making sure the
at side of the standoff is aligned with
the back of the lter. Use the included
wrench to adjust the tightening nut on
the standoff (a) to make sure they’re
aligned properly.
STEP TWO
Making sure the at side of the
standoff is facing the screw on the
back of the base stand, insert the
standoff (with the lter attached) into
the base, and tighten it securely in
place with one of the two included
smaller screws (b).
(b)
(a)
Alternatively, the guitaRF can be mounted
to any standard mic stand thread, 5/8” or
3/8” (with the included 3/8” adapter).