User Manual
guitaRF™ aSSEMBLY MaNuaL
sE Electronics guitaRF™ Assembly + Use
USING THE CABLE CLIPS
Your guitaRF comes with a small metal bracket that can be used to keep your
mic cables tidy on the back of the lter. This will also help prevent your mic
positioning from being altered if the cable is accidentally moved or stepped on.
Using a Phillips-head screwdriver, attach the bracket to the lter using the two
small included screws, through the two pre-drilled holes in the back of the lter
(as shown above). You can then t one or two mic cables under the clips, gently
folding the clips over the cables to keep them in position.