The Reflexion Filter Manual Electronics
SE Electronics Instrument Reflexion Filter Manual Thank you for purchasing the Reflexion Filter ‘portable vocal booth’. The main idea behind this product is to facilitate ‘dry’ vocal recordings, in other words to achieve a vocal recording which has greatly reduced room ambience.
About Your Reflexion Filter What is the Reflexion Filter? The Reflexion Filter is basically a portable device for recording live sound sources with reduced room ambience. It is an advanced composite wall which is positioned behind any microphone by means of a variable position stand clamp assembly which ships with the product. The main function is to help obtain a ‘dry’ vocal or instrument recording.
Assembling Your Reflexion Filter 1. Remove the Reflexion Filter and stand assembly unit from the packaging. Please keep the packaging safe to store the Reflexion Filter when not in use, or for transportation. It is robust, but parts may get damaged or lost in transit if not packaged properly. You should have the following parts – Reflexion Filter (curved wall), stand assembly, support rod and spanner to fit support rod. 2.
Assembling Your Reflexion Filter 3. Fix the support rod to the Reflexion Filter by screwing it into the socket on the bottom edge. Tighten the nut using the spanner supplied in the box. Reflexion Filter Technical Manual 4. Fix the support rod, with the attached Reflexion Filter, by pushing the support rod down into the socket on the stand clamp and tighten it in place with the metal handle on the block. 5.
The Perfect Position For Your Reflexion Filter The Perfect Position The ‘perfect position’ to achieve a ‘dry’ recording is to place of the microphone so that the mic capsule sits centrally (both vertically and horizontally) in relation to the face of the Reflexion Filter (the face is the convex side with coloured panels). It is also important to have the mic capsule of the correct distance from the face of the Reflexion Filter.
Electronics www.seelectronics.
