User Manual

4
Attenuation pad
20 dB, switchable
Powering
48 Volts according to IEC 61938
Electrical Impedance
<50 Ohms
Recommended load impedance
>1k Ohms
Current consumption
4.0 mA
Connectivity
3-pin male XLR connector
Dimensions
Diameter: 58 mm (2.28 in.) Length 169 mm (6.65 in.)
Weight
390 g (13.8 oz.)
Frequency response Polar Pattern
Support
In case you are experiencing any problems or have any questions regarding your sE product, please
contact your dealer first for the fastest and more direct service. If an authorized service is required,
it will be arranged by that dealer: http://www.seelectronics.com/dealers
If you still have difficulties with support or assistance, please do not hesitate to contact us directly:
http://www.seelectronics.com/contact-us
Lastly, remember to register your new gear to extend your warranty to a full three years:
http://www.seelectronics.com/registration
Contact
Feel free to contact us:
sE Electronics International, Inc. www.seelectronics.com
PO Box 1049 [e-mail]
6 Beach Road
Tiburon
CA 94920
USA
Our international distributors and sales representatives: http://www.seelectronics.com/contact-us
This product conforms to the standards listed in the Declaration of Conformity. Please contact us if
you want to order a free copy of the Declaration of Conformity. Technical data subject to change
without notice.