User Manual

For problems or questions, send email to [e-mail].
© Copyright 2003 SecuGen Corporation
DC1-0011A Rev 009 (06/03)
H/W Installation
Testing System Requirements
 USB Driver
 CD-ROM drive

USB port or hub (must be self-powered if installing SecuGen OptiMouse or Keyboard)
 16 MB RAM

20 MB available hard disk space

Windows 98(Second Edition or later version) / ME / 2000 / XP
General Specification
* Performance
1. Verification time : < 1 second under(Pentium II 266MHz)
2. Allowable finger rotation +/- 45 degrees
3. False rejection rate : 0.5%
4. False acceptance rate : 0.001%
5. Date size : 400Bytes(encrypted)
* Image Capture
1. Resolution : 450dpi
2. 15.7 x 13.5mm capture area
* Product Dimension
1. Optical Unit PCB size ~ 32 x 21mm(mouse)
2. Optical Unit PCB size ~ 27 x 26.7mm(keyboard)
3. Case ~ 63 x Optical Unit PCB
* Temperature Range
1. Operating : -10
℃
to +50
℃
2. Not operating : -10
℃
to +90
℃
* Power Consumption
Parallel Interface Chip 100mA(Operating)
70mA(LED ON)
Operating
60mA(LED OFF)
Optical Unit
Sleep Not Tested
*Absolute Maximum Ratings
Temperature Under Bias -40
℃
~ +85
℃
Storage Temperature -65
℃
~+150
℃
Voltage On Any Pin With
Respect to Ground
-2.0V to 7.0V
Voltage On Input pins With
Respect to Ground
During Programming
-2.0V to 14.0V
Programming Voltage With
Respect to Ground
-2.0V to +14.0V