User Manual

For problems or questions, send email to techsupport@secugen.com.

DC1-0011A Rev 009 (06/03)

For Best Results when Reading a Fingerprint:

1. Place the pad (NOT the tip) of your finger so that it covers the sensor window completely.

2. Don’t use too much pressure. Apply only as much pressure as you would need to hold a piece of paper between your fingers.

Install Drivers using SecuGen’s Easy Installation Program

Step 1

Do not connect the USB device until prompted by the program.

Step 2 If installing from CD, insert the CD into the CD-ROM drive.

If installing from download, click on the file and run setup.exe.

Step 3

When the Easy Installation program opens, click on USB Driver.

Step 4 Select the device you wish to install.

Step 5

Follow the instructions on the screen and connect the device when prompted.

Step 6

You may check the Device Diagnostic Utility box to run the utility program to practice capturing fingerprints and to

optimize the device settings.