User's Manual

3. Charging the terminal
Battery is installed in TP-120L. Completely charge it before use. The
remaining battery charge can be checked by LED lighting color.
Over 70%: LED color is green
Need charging the battery: LED color will be change to red. And if less than a
certain voltage, the power will be turn off automatically and the LED is not lit.
then can use it after charging with USB cable
 Connect the USB charge cable to the charging port and then to the
USB port of PC
 The battery charging time is within 4 hours. During the charging, the
LED is red at the bottom area and the LED turn will turn off when
charging is complete.
Overcharge protection circuit built-in, when charge for a long time is safe.
4. Touch & Click
PT-Master is designed after touching and/or clicks your finger on the touch
pad in the vertical direction.
1) Touch: Use to move the mouse cursor and coordinate input operation
2) Click: For mouse Left/Right click function and entering gestures.