User's Manual

Backlight ( [Menu]+ [2]+[1] )
Allows you to select how long or when the display screen and keypad are backlit. The backlight is
turned off 10 seconds after the last key is pushed. the backlight is turned off 30 seconds after the
last key is pushed. “ On when Cellcase open” means that the backlight is always on while Cellcase
is open. “ Always on” means that the backlight is on regardless of the Status of Cellcase. Choosing
“ Always on” significantly decreases talk time. “ Always off” means that the backlight is never on.
Contrast( [Menu] [2]+ [2] )
Screen Type ( [Menu]+ [2]+[3] )
Call Logs ([Menu]+[3])
Call List ([Menu]+ [3]+[1])
Allows you to view the 30 most recently dialed phone numbers. Once you exceed the 30-number
storage limit, the oldest call history record is overwritten. These calls are divided into 3 types of
calls
Outgoing Calls([Menu]+ [3]+[1]+[1])
Allows you to view list of all outgoing calls you made and you may place a call by pressing the
[Send].
Incoming Calls([Menu]+ [3]+[1]+[2])
Allows you to view list of all incoming calls and you may place a call by pressing [Send].
Missed Calls([Menu]+ [3]+[1]+[3])
Allows you to view list of all missed calls and you may place a call by pressing [Send].
Call Timer ([Menu]+ [3]+[2])
1. Last Call ([Menu]+[3]+[2]+[1])
Displays the time of last call made.
2. Outgoing Calls ([Menu]+ [3]+[2]+[2])
Allows you to keep a running count of the time you spend Outgoing calls in your service area since
last reset. To reset the call timer, press Soft Key 2 [Reset].
3. Incoming Calls ([Menu]+ [3]+[2]+[3])
Allows you to keep a running count of the time you spend incoming calls in your service area since
last reset. To reset the call timer, press Soft Key 2 [Reset].
4. All Calls ([Menu]+ [3]+[2]+[4])
Allows you to keep a running count of the time you spend making all calls either in your service
area or in non-service area. To set the call timer is not available.