Manualshelf

User's Manual

ManualsBrandsSea Air and Land Communications ManualsElectronicsUHF POCSAG Relay Output Receiver
12345678910
SALCOM 12-04-0000 POCSAG RECEIVER with RELAY OUTPUTS Issue A 06/02
Sea Air and Land Communications Ltd Page 7
12-04 CONFIGURATION
The programmable parameters of the 12-04 can be configured using
the SALCOM 11-46 Programming Adaptor and the Product Support
Software S1171WE1.Connect the 11-46 adaptor to S2 on the 12-04,
and connect its 9pin connector to any PC comm port. (Note this interim
software is designed for the SALCOM 1171 product and allows
programming of up to eight relay channels. When programming an 12-
04, use only channel 1, and ignore the frequency change parameter).
The software can be downloaded from the SUPPORT area of the
SALCOM web page
(www.salcom.co.nz)
. Programming of the 12-04
should be performed only by suitably qualified personnel.
OPTIONS
Some options are available for the 12-04 to extend its use to other
situations. All these options can only be fitted by the SALCOM factory
and must be requested at the initial order.
1 A 10A 240VAC relay can be fitted to allow the unit to switch
mains operated equipment.
2. A second relay can be fitted making the 12-04 a two channel
receiver. This relay can only be a 1A 24v type.
3. If an external aerial is required a BNC type aerial connection
can be fitted.
WARRANTY
Our Products are warranted for a period of 12 months from date of
purchase against faulty materials and workmanship. Should any fault
occur the unit should be returned to the vendor, freight pre-paid.
Please include a description of the fault to assist with prompt return.
Any unauthorized alterations or repairs will invalidate the warranty.
DISCLAIMER
All information provided in this document is carefully prepared and
offered in good faith as a guide in the installation, use and servicing of
our products. Installers must ensure that the final installation operates
satisfactorily within the relevant regulatory requirements. We accept no
responsibility for incorrect installation. We reserve the right to change
products, specifications, and installation data at any time, without
notice.