User`s manual

Section 4: Configure Menu, Part II - Instrument .con File
45
Old Style SBE 31 Configuration
Select if NMEA interface option
installed in SBE 31 and
SBE 31 is connected to a
NMEA navigation device.
SEASAVE automatically adds
current latitude, longitude, and
universal time code to data
header. Select NMEA (Lat/Lon)
Interface in SEASAVE’s
Configure menu to control how
Lat/Lon data is incorporated.
Click to modify list of sensors (after number of
frequency channels and voltage words have
been specified above). Data Format Definition
dialog box with a list of sensors appears.
Select sensors.
Click to return to Examine / Change
Instrument Configuration File dialog
box. In that dialog box, click Change
Calibration Coefficients to view,
modify, or enter coefficients.
Select to match your system (6, 8,
12, 24, or 33 1/3 scans/second).
IEEE-488 (GPIB) or RS-232C,
based on how SBE 31 is
connected to computer.
Listing of channels at
bottom of dialog box
reflects these choices.
Most SBE 31 CTD systems do not have a pressure sensor.