User`s manual

Manual revision 016 Section 2: Description of FastCAT SBE 49
14
Data I/O
The FastCAT receives setup instructions and outputs data and diagnostic
information via a three-wire RS-232C link, and is factory-configured for
9600 baud, 8 data bits, 1 stop bit, and no parity. FastCAT RS-232 levels are
directly compatible with standard serial interface cards (IBM Asynchronous
Communications Adapter or equal). The communications baud rate can be
changed using the Baud= command (see Section 4: Deploying and
Operating FastCAT).