Operating instructions

SLEEP OUT FLAP MODE
AUTOSTART INFLAP FAN SPEED
AUTOSTOP HOUR MIN
1) Press the ON/OFF Button to
turn the unit ON
2) Press the MODE Button
and select the desired mode
(AUTO, COOL, DRY, or FAN)
FAN SPEED Button
4) Press the FAN SPEED
Button to select the desired
fan speed
Temperature adjusting procedure during AUTO SELECT operation
3) Press the OUTFLAP
Button to select the desired
angle of the outer horizontal
louvers. The horizontal
louvers control the vertical
air flow from the unit.
There are 5 stationary angles,
and the last position is
continuous swing of the
horizontal louvers.
5) Press the INFLAP
Button to select the desired
action of the vertical louvers.
The vertical louvers control
the horizontal air flow from
the unit.
The vertical louvers either
direct the air straight out of
the unit, or they swing left to
right continuously.
By positioning the OUTFLAP
and INFLAP, you may direct the
airflow to maximize the cooling
effectiveness
NOTE: in the cooling operation with the OUT FLAP blowing down (4th & 5th positions),
the outer horizontal louvers will return to the level (position 1) after 1 hour in order to
prevent condensate water from dripping.
LOUVER ADJUSTMENTS (Air Flow Direction)
-8-