Operating instructions

USE OF THE REMOTE CONTROL (COOL MODE) USE OF THE REMOTE CONTROL (FAN MODE)
SLEEP OUT FLAP MODE
AUTOSTART INFLAP FAN SPEED
AUTOSTOP HOUR MIN
1) Press the ON/OFF Button to
turn the unit ON
2) Press the MODE Button
and select the COOL Mode
FAN SPEED Button
4) Press the FAN SPEED
Button to select the desired
fan speed
Temperature adjusting procedure during AUTO SELECT operation
5) Press the ON/OFF Button
or select another mode to
stop the COOL mode.
3) Press the + or - Buttons
to adjust the room temperature
Each press of the button will
change the temperature 1°
The COOL mode activates the
outdoor compressor as
necessary to satisfy the
selected room temperature.
G
G
SLEEP OUT FLAP MODE
AUTOSTART INFLAP FAN SPEED
AUTOSTOP HOUR MIN
1) Press the ON/OFF Button to
turn the unit ON
2) Press the MODE Button
and select the FAN Mode
FAN SPEED Button
4) Press the FAN SPEED
Button to select the desired
fan speed
Temperature adjusting procedure during AUTO SELECT operation
5) Press the ON/OFF Button
or select another mode to
stop the FAN mode.
3) Press the + or - Buttons
to adjust the room temperature
Each press of the button will
change the temperature 1°
NOTE: in the FAN mode, the
compressor will not run. If the
room temperature exceeds the
set temperature, the fan will
come on to circulate the air. If
the room temperature drops
below the set temperature, the
fan will turn off.
-5-