Operating instructions

SLEEP OUT FLAP MODE
AUTOSTART INFLAP FAN SPEED
AUTOSTOP HOUR MIN
USE OF THE REMOTE CONTROL (SLEEP MODE) USE OF THE REMOTE CONTROL (CLOCK SET - BATTERIES)
SLEEP OUT FLAP MODE
AUTOSTART INFLAP FAN SPEED
AUTOSTOP HOUR MIN
NOTE: Pressing the
FAN SPEED button during
SLEEP mode will cancel the
sleep mode.
Temperature adjusting procedure during AUTO SELECT operation
1) Press the SLEEP Button to
change to the sleep mode
(quiet operation)
2) Press the SLEEP Button
again to return to normal
operation.
In the SLEEP mode, the system
lowers the fan speed, and raises
the setpoint temperature slightly.
-6-
CLK Button
(to set clock)
1) Remove the battery
cover on the back
of the remote
2). Use a ball point
pen or similar
device, press this
button one time
3). Press the HOUR
button to set the hours
4). Press the MIN button
to set the minutes.
5.) Press the CLK button
again to lock in set time.
6). Replace the battery
cover by sliding it
back on
+
+
Replace batteries with 2 ea
AAA cells. Observer proper
Polarity.