Operating instructions

Pre-Season Preparation Chart

NOTE: It is highly recommended that the dealer perform the annual safety in-

spection and factory campaigns in addition to the pre-season preparation all at

the same time.

➀ Before installing new spark plugs, it is suggested to burn the excess BOM-

BARDIER LUBE lubricant or equivalent by starting the engine using the old

spark plugs.

➁ Safety item covered in the annual safety inspection.

OPERATIONS TO BE PERFORMED BY

Lubrication/corrosion protection OPERATOR

Battery condition/charging and reinstallation DEALER

Battery, starter connections and routing ➁ DEALER

Spark plug replacement ➀ OPERATOR

Jet pump oil inspection DEALER

Propulsion system inspection DEALER

Oil filter replacement DEALER

Fuel tank straps OPERATOR

Oil tank straps OPERATOR

Oil injection tank filling OPERATOR

Flame arrester inspection ➁ DEALER

Fuel filter replacement DEALER

Fuel line condition ➁ DEALER

Filler neck, fuel tank and fuel cap condition ➁ DEALER

Check valves, fasteners, fuel system pressurization ➁ DEALER

Throttle ➁ and choke cable inspection/adjustment DEALER

Oil injection pump adjustment and bleeding DEALER

Engine ignition timing DEALER

Carburetor adjustment DEALER

Steering system adjustment/inspection ➁ DEALER

Reverse cable adjustment DEALER

Inspection of bailer pick-ups DEALER

Inspection of cooling system hoses DEALER

Monitoring beeper DEALER

Digitally encoded security system DEALER

Smo2001-001a.book Page 55 Tuesday, May 23, 2000 2:18 PM