Specifications

F06H1TY
12
1. Fuse cover
2. Fuse tabs
Main Fuse
The main fuse is located beside the
VCM.
F22H02Y
2
1
1. VCM
2. Main fuse
General Inspection and
Cleaning
Inspection
Remove engine cover and lock the
steering pole with the holder in the up-
right position.

WARNING
Always install steering pole holder
immediately after engine cover re-
moval to support the pole securely
while working in the engine com-
partment.
Check engine cover tabs and C-hooks
as well as latch co
ndition.
F22L0FY
2
1
1. Tab
2. C-hook
NOTE: Verify periodically that the
latch pin for the engine cover is tight
in the body. Tighten if needed and
make sure engine cover latches prop-
erly.
Check engine compartment for any
damage or leaks from the fuel/oil injec-
tion systems. Ensure all hose clamps
are secure and no hose is cracked,
kinked or shows any other damage.

WARNING
If any gasoline leak and/or odor are
present, do not start the engine.
Have the watercraft serviced by an
authorized Sea-Doo dealer.
Inspect muffler, battery, fuel tank and
oil reservoir fastening devices. Visu-
ally check electrical connections for
corrosion and tightness.
Inspect hull and jet pump water intake
grate for damage. Replace or have
damaged parts repaired.
Reinstall engine cover and relatch
properly.
Cleaning
The bilge should be cleaned by an
authorized Sea-Doo dealer to remove
any fuel/oil/electrolyte deposits and
mildew.
82
______________________
www.SeaDooManuals.net