Service manual

CANDoo Professional
126
3.1.2.2.2.2.2)
Using features in the Vehicle tab:
To change the VIN number or enter a VIN in a new ECU
 Select and delete the current VIN that appears in the box
 Type in new VIN number
 Select Vehicle, and click Write Vehicle to write the change into the ECU. A box will pop
up and ask you to remove the key to complete the write operation. Please follow the
instructions in the box.
 Please note the the Change VIN feature only available on CANDooPro Unlimited version.
If you are using the Limited version of CANDooPro on a new ECU, CANDooPro will prompt
you to enter in a VIN number for the ski. (CANDooPro uses this VIN number for tracking
purposes) Please note that you can put anything you want into the VIN number field, but
please be aware that once you enter this information using the Limited system, you cannot
change it anymore.)
To reset the Rental Hours
 Click the Reset box next to the Rental Hours
 Rental Hours should reset to zero
 Select Vehicle, and click Write Vehicle to write the change into the ECU. A box will pop
up and ask you to remove the key to complete the write operation. Please follow the
instructions in the box.
To reset the Last Service Hours (NOTE: This action also turns off the Maintenance Reminder
light)
 Click the Reset box next to the Service Hours
 Service Hours should reset to zero
 Select Vehicle, and click Write Vehicle to write the change into the ECU. A box will pop
up and ask you to remove the key to complete the write operation. Please follow the
instructions in the box.
To change the Owner Information section
 Select and delete the current information contained in the Customer box
 Type in the new information
 Select and delete the current information contained in the date box
 Type in the new information
 Select Vehicle, and click Write Vehicle to write the change into the ECU. A box will pop
up and ask you to remove the key to complete the write operation. Please follow the
instructions in the box.