Service manual

CANDoo Professional
136
3.1.2.2.2.2.3 Settings Tab
CANDooPro > Vehicles > Sea-Doo Watercraft > 2 Stroke RFI Models(See 3.1.2) >
Late RFI Models (2005)(See 3.1.2.2) > Working with CANDooPro(See 3.1.2.2.2) >
Diagnostic Session Details(See 3.1.2.2.2.2) >
Settings Tab
(See
3.1.2.2.2.2.2.5)
(See
3.1.2.2.2.2.4)
The Settings Tab:
In the Settings tab, you can do the following:
 View and Reset the Throttle Position Sensor (TPS) setting
 View and change the Ignition Angle Timing Offset.
To Reset Throttle Position Sensor (TPS) :
 Always refer to your Service Manual for the proper instructions for your watercraft. In
general, ensure that the throttle cable has slack, and that the throttle is closed against the
idle stop screw, by opening and closing the throttle several times. Do not alter the throttle
stop screw setting!; just make sure the throttle is closed.