Service manual

CANDoo Professional
13
 Power - Glows green when the interface box is connected to a USB port on the PC
 Vehicle Activity - Blinks blue during communication between the interface box and the
watercraft
 USB Activity - Blinks blue during communication between the interface box and the PC.
CANDooPro Interface Cables
Each brand of vehicle has specific cables that are used to connect the CANDooPro interface box to
the vehicle. Please refer to the Connecting & Starting a Session section for the vehicle you are
working on to get more information about each connection cable.
2.3 Quick Start Guides
Please select the Quick Start guide below for the brand you are working on below
2.3.1 Sea Doo Watercraft
Thank you for purchasing Candoopro! Please read the following information before using the
system for the first time. If you have any questions about the use of the system, please contact us
at [e-mail], or visit our Forum at http://forums.candoopro.com/.
Quick Start Guide – Sea Doo
First Time: (Internet Connection is REQUIRED)
• Install USB Drivers, by entering the following into your web browser
o http://www.candoopro.com/candooinstall/driver/usbdriver.exe
• Connect CANDoo Professional System to the PC with the provided USB Cable
• Install CANDoo Professional Software, by entering the following into your web browser
o http://www.candoopro.com/candooinstall/CanDooPro.msi