Service manual

CANDoo Professional
140
3.1.2.2.2.2.4.2)
Fault Overview
The 2005 RFI Engine Management System continually checks the various components in the
system for proper operation. If it detects a problem with any component in the system, it will create
an active fault related to the problem. Anytime this happens, the system logs these faults within the
fault table. For many of these faults, it also logs a range of engine operating conditions. Note that
not all faults are stored. Some faults, once fixed, have no record in the fault table.
The Fault Page:
The 2005 RFI fault system displays data associated with faults that have been logged since the last
time the faults have been cleared. For any faults listed in the box on the left side, simply click on
the fault code number to have the page display the information associated with the fault code.
Many, but not all faults will have information stored with the fault that will assist in troubleshooting
the problem associated with the fault.
Fault Code:
The fault codes are special codes assigned to particular problems. More information about the
fault codes can be found in the Service Manual.
Source: