Service manual

CANDoo Professional
14
• Start CANDoo Professional by going to start menu and launching CANDoo Professional
o When prompted to download the new update, you must select “ YES”
• If the system prompts to download flash program into the interface box, make sure the USB
cable is securely attached to PC and interface box, and make sure the interface box is not
connected to a vehicle during the loading process.
Each Use: (Internet Connection is Optional)
• Connect CANDoo Professional System to the PC with the provided USB Cable
• Start CANDoo Professional by going to start menu and launching CANDoo Professional
• Bottom left of the CANDoo Professional software shows the current status
• After vehicle is connected select Vehicle menu option and click read
Vehicle Connection:
• There are two options to connect a vehicle, depending on type of vehicle
o Use the 9 Pin -> 6 Pin adapter for DI and 4-Tec models(You must also insert a lanyard
on the post to power up the ECU)