Service manual

CANDoo Professional
151
3.1.2.2.2.2.14 Config Tab
CANDooPro > Vehicles > Sea-Doo Watercraft > 2 Stroke RFI Models(See 3.1.2) >
Late RFI Models (2005)(See 3.1.2.2) > Working with CANDooPro(See 3.1.2.2.2) >
Diagnostic Session Details(See 3.1.2.2.2.2) >
Config Tab
(See
3.1.2.2.2.2.13)
(See
3.1.3)
The Config Tab:
The Config tab allows you to change the overall program numbering system between US and
Metric values, as well as allowing you to personalize the "Serviced By " setting.
Please note that if you change these values, you must restart the program in order for the
changes to take effect!