Service manual

CANDoo Professional
177
Often you will find that the key listing contains a number of keys that are no longer used. This can
happen over the years as keys are lost, and new keys are added without removing the old key
numbers. Candoopro makes it easy to remove these old unused key numbers.
To determine if your listing contains old, unused key numbers, simply test each key you have with
CANDooPro, write down the serial number of the key, and compare it to the ones in the list. You
can then remove any that are not currently needed.
To Erase a Key:
For any actions to be performed on keys, click on the far left column in the row for the particular key
you wish to delete. The entire row for that key must be completely highlighted in blue:
Once you have highlighted the key you wish to delete, simply click "Erase Selected Key", and the
selected key will disappear from the key listing:
Now that the key has been deleted, you must Write this change into the MPEM. Select "Vehicle" in
the upper tab, then "Write Vehicle".