Service manual

CANDoo Professional
184
To determine the Igntion Angle setting:
NOTE:The watercraft MUST BE RUNNING to check and change the igntion angle setting!
 Once the engine is running , click the Lock (Disable Advance) button. This keeps the
advance from altering the base timing setting.
 Using an appropriate timing light, check that the marks you scribed on the flywheel and the
pointer are in alignment.
 If not, you will need to alter the timing angle
To Change the Igntion Angle setting:
Press the arrow in the white box to the left of the Set button, which will bring up a
drop down listing of igntion angle settings: