Service manual

CANDoo Professional
18
o http://www.candoopro.com/candooinstall/CanDooPro.msi
• Start CANDoo Professional by going to start menu and launching CANDoo Professional
o When prompted to download the new update, you must select “ YES”
Each Use: (Internet Connection is Optional)
• Connect CANDoo Professional System to the PC with the provided USB Cable
• Start CANDoo Professional by going to start menu and launching CANDoo Professional
• If you have a multi-brand version of software (Sea Doo and Yamaha), select Yamaha
• Bottom left of the CANDoo Professional software shows the current status
• Connect the Candoopro system to the Waverunner diagnostic connector.
Vehicle Connection:
NOTE: Before connecting to a ski, please read the service manual for the particular model
of Waverunner!
In general, starting a diagnostic session involves two steps:
1. Connecting the Candoopro system to the Waverunner diagnostic connector
2. “ Waking up” the engine ECU to enable the Candoopro system to talk to the ECU
Connecting the Diagnostic Cable to the Waverunner:
Some Yamaha engines (like the outboard motors) have a dedicated 3-pin diagnostic connector ,