Service manual

CANDoo Professional
21
Once the ECU is woken up, the Candoopro application should detect the Yamaha ECU, indicated
by the ski icon on the lower left of the screen changing from red to green, and the status should
change from “ Looking for Vehicle” , to “ Yamaha Detected” .
Once “ Yamaha Detected” appears, go to the upper left of the screen, select “ Vehicle” , then
“ Read Vehicle” .
The Candoopro system will read the data from the ECU. You are now ready to read and clear
faults, view operating history, activate various functions available for that particular model.
General Faq’ s:
• CANDoo Professional checks for updates on startup, if there is an active internet connection.
• The hardware box must always be connected to the PC when you startup the program to enable
the system to check for new updates.
• If you are using wireless and get out of range, it can cause CANDoo Professional to freeze up
while trying to connect to the website on startup. We suggest disabling the wireless on your laptop
if you are moving out of wireless range.
• Make sure you have a fully charged battery, failure to do so can cause data corruption!
• When you are done, always close the program first before disconnecting the USB cable to the
Candoopro box. If you disconnect the USB cable before closing the program, the program will
freeze and you may need to stop the program manually via the Task Manager to exit the program.