Service manual

CANDoo Professional
224
 Click the Reset box next to the Service Hours
 Service Hours should reset to zero
 Select Vehicle, and click Write Vehicle to write the change into the ECU. A box will pop
up and ask you to remove the key to complete the write operation. Please follow the
instructions, and make note that on 2007+ models you need to remove, reinstall, and
remove the key again to complete the write operation. (NOTE: On 2009+ watercraft with
the iControl system, you do not have to remove the key. A box will not pop on on these
models)
To change the Owner Information section
 Select and delete the current information contained in the Customer box
 Type in the new information
 Select and delete the current information contained in the date box
 Type in the new information
 Select Vehicle , and click Write Vehicle to write the change into the ECU. A box will pop
up and ask you to remove the key to complete the write operation. Please follow the
instructions, and make note that on 2007+ models you need to remove, reinstall, and
remove the key again to complete the write operation. (NOTE: On 2009+ watercraft with
the iControl system, you do not have to remove the key. A box will not pop on on these
models)
3.1.4.3.2.2 Keys Tab
CANDooPro > Vehicles > Sea-Doo Watercraft > 4 Stroke (4-TEC) Models(See 3.1.4) >
Working with CANDooPro(See 3.1.4.3) > Diagnostic Session Details(See 3.1.4.3.2) >
(See