Service manual

CANDoo Professional
231
After you have added one or more keys to the listing, then you can write the change into the MPEM
with the Vehicle, Write Vehicle command.
3.1.4.3.2.2.4 Adding Keys
CANDooPro > Vehicles > Sea-Doo Watercraft > 4 Stroke (4-TEC) Models(See 3.1.4) >
Working with CANDooPro(See 3.1.4.3) > Diagnostic Session Details(See 3.1.4.3.2) >
Keys Tab(See 3.1.4.3.2.2) >
Adding Keys
(See
3.1.4.3.2.2.3)
(See
3.1.4.3.2.2.5)
Adding Keys:
The ECU can store up to 8 keys. To add a new key, you must have an available key slot (empty
row) in the key chart. If the chart has all 8 keys filled, you must erase a key before CANDooPro will
allow you to add a new key.
To Add a new Key:
Insert the key you wish to add to the ECU onto the post on the CANDooPro interface box. Ensure
the key is pushed all the way down onto the post and is square on the post.