Service manual

CANDoo Professional
272
3. Ensure the Safety Lanyard is installed on the stop switch, and turn the key to the ON position.
You are now ready to start the diagnostic session.
Starting the Diagnostic Session:
When the Candoopro application is running, and the ECU has been powered up, you are ready to
start the diagnostic session.
Once the EMM is powered up, the Candoopro application should detect the Kawasaki EMM,
indicated by the ski icon on the lower left of the screen changing from red to green, and the status
should change from “ Looking for Vehicle”, to “ Kawasaki DI” for the STX-1100 DI skis.
Once the Kawasaki ECU detected indication appears, go to the upper left of the screen, select
“ Vehicle”, then “ Read Vehicle”.