Service manual

CANDoo Professional
287
5. Ensure the emergency stop tether is attached to the stop switch, and attach the ignition key to
the switch and turn to the ON position. You are now ready to start the Diagnostic session.
Starting the Diagnostic Session:
When the Candoopro application is running, and the ECU has been powered up, you are ready to
start the diagnostic session.
Once the ECU is powered up, the Candoopro application should detect the Kawasaki ECU,
indicated by the ski icon on the lower left of the screen changing from red to green, and the status
should change from “ Looking for Vehicle” , to “ Early Kawasaki ” for the STX-12F/15F skis.
Once the Kawasaki ECU detected indication appears, go to the upper left of the screen, select
“ Vehicle”, then “ Read Vehicle”.