Service manual

CANDoo Professional
292
To clear the occurred faults, you first press the Clear Faults button. The Faults will be cleared in
the ECU. Then you must power off the vehicle, and re-start the CANDooPro diagnostic session for
the fault to disappear from stored status.
Step #5 - Run watercraft to verify problems are fixed
It is always advisable to run the watercraft again after fixing and clearing faults to ensure that all
problems are fixed. If you are running the watercraft while CANDooPro is connected, you can hit
the Refresh button at any time to check for new faults.
3.3.2.3.3 Activate Tab
CANDooPro > Vehicles > Kawasaki Jet Skis(See 3.3) > 4-Stroke STX -12F/15F
Models(See 3.3.2) > Working with CANDooPro(See 3.3.2.3) >
Activate Tab
(See
3.3.2.3.2.2)
(See
3.3.3)
Activate Features:
The Activate page allows you to dynamically test a number of components to simplify
troubleshooting
NOTE: All of the activate features on the STX-12F/15F models are used while the engine is
running!
Description of Activate Features: