Service manual

CANDoo Professional
293
 The Stop Injector and Stop Ignition Coil buttons shut off the fuel and ignition to the
selected cylinder while the engine is running. Pressing the selected cylinder should cause
the engine to run roughly and slow down slightly. Each cylinder should affect the overall
running by the same relative amount.
 The ISC Stepping Motor button moves the idle valve in and out to check that the valve is
operational. The engine speed should vary when this button is pressed
3.3.3 4-Stroke Ultra 250/260/300X/LX Models
Please refer to each individual section for details
3.3.3.1 Overview of Capabilities
Overview of Capabilities
The following is a brief overview of the various capabilities of the CANdooPro system for the 2007+
Ultra 250X/260X/300X/LX models. Please refer to each specific tab for more details.
The Kawasaki Tab:
Once you have read the data from the ECU, CANDooPro will start out in the Kawasaki tab, which
shows you the ECU part number.