Service manual

CANDoo Professional
297
Steps to connect:
1. Locate the 4-pin Diagnostic Connector, which located next to the battery in the front storage
compartment. The connector is black on the 2007-2009 models, and white on 2010-2012 models:
2. Remove the dust cap from the connector, and attach the Main Diagnostic cable to the diagnostic
connector. NOTE: On 2007-2009 models, the Main cable connects directly to the connector on the
ski. On 2010 models, you must first attach the 2010+ Adapter cable to the Main cable, then
connect the 2010+ Adapter cable to the diagnostic connector on the ski.