Service manual

CANDoo Professional
30
5. Ensure the emergency stop tether is attached to the stop switch, and attach the ignition key to
the switch and turn to the ON position. You are now ready to start the Diagnostic session.
2007-2012 Ultra 4-stroke Models (LX/250(L)X/260(L)X/300(L)X):
Connecting the Diagnostic Cable to the Jet Ski:
Steps to connect:
1. Locate the 4-pin Diagnostic Connector, which located next to the battery in the front storage
compartment. The connector is black on the 2007-2009 models, and white on 2010-2012 models: