Manualshelf

Service manual

ManualsBrandsSea-doo ManualsBoat2005 3D RFI
31323334353637383940
CANDoo Professional
31
2. Remove the dust cap from the connector, and attach the Main Diagnostic cable to the diagnostic
connector. NOTE: On 2007-2009 models, the Main cable connects directly to the connector on the
ski. On 2010 models, you must first attach the 2010+ Adapter cable to the Main cable, then
connect the 2010+ Adapter cable to the diagnostic connector on the ski.
3. To keep the ECU powered up for the diagnostic session, you must attach the Immobilizer
Bypass cable. The connector for the immobilizer is located behind the ECU, so you need to first
remove the ECU cover panel in the front storage compartment: