Service manual

CANDoo Professional
36
7. Insert a Kawasaki key (either FAST or SLO) into the key switch to power up the ski, ensure the
emergency lanyard is attached to the stop switch, and you are now ready to start the diagnostic
session.
1999 to 2003 STX-1100 DI 2 stroke model:
Connecting the Diagnostic Cable to the Jet Ski:
Steps to connect:
1. Remove the seat, and look for the Yellow 6-pin diagnostic connector at the rear of the engine
bay, just under the seat. It will have a dust cap on it with a looped single wire on the end of it: