Service manual

CANDoo Professional
38
3. Ensure the Safety Lanyard is installed on the stop switch, and turn the key to the ON position.
You are now ready to start the diagnostic session.
Starting the Diagnostic Session:
When the Candoopro application is running, and the ECU has been powered up, you are ready to
start the diagnostic session.
Once the ECU is powered up, the Candoopro application should detect the Kawasaki ECU,
indicated by the ski icon on the lower left of the screen changing from red to green, and the status
should change from “ Looking for Vehicle” , to “ Early Kawasaki ” for the STX-12F/15F, “ Late
Kawasaki” for the Ultra series skis, or “ Kawasaki DI Detected” for the STX-1100 DI skis.
Once the Kawasaki ECU detected indication appears, go to the upper left of the screen, select
“ Vehicle” , then “ Read Vehicle” .