Service manual

CANDoo Professional
41
NOTE: The thumbscrews on the cable do NOT attach to the box! This was
intentional by design, for a very good reason. You will notice that the
CANDooPro cables are very strong and heavy, and the CANDooPro interface
box is very light. If we put the mating nuts on the box so the cable is
fastened tightly to the box, and the box falls off the bench or ski while you
are working on it (which WILL happen!), then the internal connection from
the box connector to the internal PC will be damaged. Without the nuts, the
cable connection will simply pop off the box if it falls, so the box connector
will not be damaged.
2. Connect the DESS post adapter cable to the 9pin/6-pin cable, by sliding the two cables
together until they click..