Service manual

CANDoo Professional
51
The Settings Tab:
In the Settings page, you can do the following:
 Modify the Accessory Cutoff value (controls the time the gauges stay on after vehicle
engine is shut off)
 Modify the Ignition Settings
o The Correction value sets the base timing offset
o The Curve value controls the overall shape of the ignition curve
o The Limiter value controls the top end advance setting
NOTE! The Curve and Limiter values are experimental, and should only be
changed by experienced tuners and racers, as changing the values can
cause detonation and overheating, resulting in severe engine damage!