Service manual

CANDoo Professional
60
The key number shown by the popup box is the 64 bit serial number of the key. (Shown in
Hexidecimal format) Note that this only tests the microchip in the key; it does not check for a weak
magnet.
3.1.1.2.2.2.3 Erasing Keys
CANDooPro > Vehicles > Sea-Doo Watercraft > 2 Stroke Carbureted Models >
Working with CANDooPro(See 3.1.1.2) > Session Details(See 3.1.1.2.2) > Keys
Tab(See 3.1.1.2.2.2) >
Erasing Keys
(See
3.1.1.2.2.2.2)
(See
3.1.1.2.2.2.4)
Erasing Keys:
Often you will find that the key listing contains a number of keys that are no longer used. This can
happen over the years as keys are lost, and new keys are added without removing the old key
numbers. Candoopro makes it easy to remove these old unused key numbers.
To determine if your listing contains old, unused key numbers, simply test each key you have with
CANDooPro, write down the serial number of the key, and compare it to the ones in the list. You
can then remove any that are not valid.