Service manual

CANDoo Professional
74
 USB Connection Status indicates if the CANDooPro box is communicating to the computer
over the USB bus
o Green is connected
o Red is disconnected or not communicating
 Vehicle Connection Status indicates if the CANDooPro system has detected or is
communicating with the vehicle
o Green is detected or communicating
o Red indicates no vehicle is detected or is not communicating
 Number of Connections indicates the total number of modules on the Vehicle that are
communicating with Candoopro system
o Zero indicates no modules are communicating
o One is typical for most Carburated, DI, and RFI vehicles (MPEM)
o Two is typical for early 4-tec models (ECU and MPEM)
o Three is typical for some later 4-tecs (ECU, MPEM, Cluster)
o Late model iS vehicles can have 5 modules communicating
 Current Process shows the current activity
At this point, the CANDooPro program is looking for communication from the ski, and the zero
indicates that it does not have any communication with a ski.
6. Attach the DESS Adapter to the DESS post on the ski.
 Place the DESS adapter upright and to the side of the DESS post as shown in the photo
below: