Service manual

CANDoo Professional
76
The DESS Adapter contains a magnet, which closes the reed switch in the DESS post, and turns
on the MPEM. The MPEM should start communcating with the CANDooPro system. Once the
CANDooPro system detects communcation with the MPEM, it should indicate that it is talking to the
MPEM by a change in the status bar on the lower left of the screen.
You should see the Vehicle Connection icon change from Red to Green, the number of
connections change from zero to one, and "DESS Detected" appear in the lower status bar, per
the screenshot snippet below:
The vehicle is now ready for a CANDooPro session!