Service manual

CANDoo Professional

3. Write the changes back to the MPEM, using the Write Vehicle command contained in the

Vehicle tab of the program:

3.1.2.1.2.1 Overview of Capabilities

CANDooPro > Vehicles > Sea-Doo Watercraft > 2 Stroke RFI Models(See 3.1.2) >

Early RFI Models (1998-2004)(See 3.1.2.1) > Working with CANDooPro(See

3.1.2.1.2) >

Overview of Capabilities

(See

3.1.2.1.2)

(See

3.1.2.1.2.2)

Overview of Capabilities

The following is a brief overview of the various capabilities of the CANdooPro system for the 2

stroke carbureted models. Please refer to each specific tab for more details.

The Vehicle Tab:

Once you have read the MPEM, CANDooPro will start out in the Vehicle tab.

In the Vehicle tab, you have the following capabilities:

 Modify the VIN number (only available for CANDooPro Unlimited version; you cannot

change the VIN number with the Home version)

 Modify the Engine Number

 Reset the Rental Hours (not all models have Rental Hours)

 Modify Customer information and date

 Reset the Service Hours

Please note that the information displayed will vary according to the features available for the

particular model vehicle you are working on. (The screen below is for a 1998 Sea Doo GTX Ltd.)

In general, the features shown in pure white are able to be modified by the user; fields in light gray

(like Total Hours and App Code) cannot be modified. (Note that VIN is only able to be modified by

users that have the Unlimited version of CANDooPro)