Operating instructions

58
SOME GTX AND XP MODELS WITH A
FOGGING TUBE
1. Partially pull tube out of air box to inject
BOMBARDIER LUBE. Push tube in when
finished
OTHER GTX AND XP MODELS WITHOUT A
FOGGING TUBE
1. Air intake silencer
2. Spray BOMBARDIER LUBE here
CAUTION: Ensure to properly repo-
sition rubber flap when done.
NOTE: After approximately half a min-
ute, close fuel tank valve (if so equipped)
to run engine out of fuel while lubricat-
ing.
CAUTION: When engine begins to
run irregularly because of fuel star-
vation, immediately stop water flow
before engine dies.
Close the water tap then stop the en-
gine.
CAUTION: Always close the water
tap before stopping the engine.
Final Steps
Disconnect the garden hose.
GTS Models
Unlock and remove coupler hose. Re-
install dust cap over fitting spigot.
Remove hose pincher from water out-
let hose.
CAUTION: Serious engine damage
can occur if hose pincher is not re-
moved.
All Models
Remove spark plug cables and con-
nect them on the grounding device.
GTS MODELS
1. Spark plug cables on grounding device
GS AND GTI MODELS
1. Spark plug cables on grounding device
F12F01Y
1
F02H0ZY
1
2

WARNING
Always use spark plug cable ground-
ing device when removing spark
plugs.
F01H64Y
1
F00H0DY
1
smo2000-002a.book Page 58 Tuesday, September 28, 1999 12:00 PM
www.SeaDooManuals.net