Operating instructions

68
Periodic Inspection Chart
DESCRIPTION
FREQUENCY
FIRST 10 HOURS EVERY 25 HOURS EVERY 50 HOURS EVERY 100 HOURS OR SEASONALLY TO BE PERFORMED BY
GENERAL
Lubrication/corrosion protection O
ENGINE
Head bolts, retorque D
Support and rubber mount condition/tightness
D
Exhaust system fasteners
D
RAVE valve cleaning (if so equipped)
D
Counterbalance shaft oil level (if so equipped)
D
Spark plug inspection, cleaning and adjustment
D
Spark plug replacement
D
Ignition timing (RFI models)
D
COOLING
SYSTEM
Flushing O
Hose condition and fasteners
O
Inspect/clean engine drain tube
D
Water flow regulator valve inspection
(if so equipped)
D
FUEL
SYSTEM
Carburetor adjustment including choke/throttle
cable adjustments (carburetor-equipped models)
D
Throttle/choke cables, inspection/lubrication
O
Fuel filter (carburetor-equipped models) and
lines inspection
D
Fuel filter replacement
(carburetor-equipped models)
D
Fuel injector cleaning (RFI models)
D
Fuel injector sensors visual inspection (RFI models)
D
Fuel vent line pressure relief valve inspection
D
Fuel lines, check-valve and fuel system
pressurization
D
Fastener tightening (flame arrester,
carburetor(s)/throttle body, fuel lines, fuel rail
(if so equipped)
Fuel tank straps O
LUBRICATION
SYSTEM
Oil injection pump adjustment D
Oil filter and lines inspection
D
Oil filter replacement
D
Oil reservoir straps
O
smo2000-002a.book Page 68 Tuesday, September 28, 1999 12:00 PM
www.SeaDooManuals.net