Operating instructions

87
N.A.: Not Applicable.
ENGINE XP (5651/5655)
Engine type Rotax 947, 2-stroke
Induction type Reed valve
Exhaust system Water cooled/water injected with regulator
Exhaust valve Rotax Adjustable Variable Exhaust (RAVE)
Lubrication
Type Oil injection
Oil type XP-S synthetic injection oil
Number of cylinders 2
Displacement 951.2 cm
3
(58 in
3
)
Rev limiter setting 7200 RPM ± 50
COOLING
Type
Open circuit.
Direct flow from propulsion unit
ELECTRICAL
Magneto generator output 180 W @ 6000 RPM
Ignition system type Digital DC-CDI
Spark plug
Make and type NGK, BR8ES
Gap 0.5 - 0.6 mm (.020 - .024 in)
Starting system Electric starter with reduction gear
Battery 12 V, 19 A•h
Fuse
MPEM 5 A
Electrical system 2 x 15 A
VTS system 7.5 A
Bilge pump 3 A
CARBURETION
Fuel type Regular unleaded gasoline
Carburetor
BN 46i (diaphragm).
Fuel accelerator pump.
Quantity: 2
PROPULSION
Propulsion system Bombardier Formula pump
Jet pump type Axial flow, single stage
Transmission Direct drive/split front and rear
Jet pump oil type
SEA-DOO synthetic
polyolester oil SAE 75W90 GL5
Pivoting angle of direction (nozzle) ~20°
Minimum required water level for jet pump 90 cm (3 ft)
smo2000-002B.fm Page 87 Tuesday, September 28, 1999 1:44 PM
www.SeaDooManuals.net