Operating instructions

23
As a self test, all LCD segments and
the LED will turn on for 3 seconds each
time the craft is started.
In the event of a warning message
such as low fuel, hi-temp, etc., the
message will blink and override all oth-
er display functions.
If more than one warning message oc-
curs, the messages will blink and reap-
pear every 4 seconds.
Scrolling Functions
Press the MODE button until the de-
sired function is displayed on the Info
Center gauge.
Reset a Function
To reset a function such as the chro-
nometer, peak speed, distance, etc.,
press and hold the SET button for 2
seconds while in the appropriate mode.
Language Option
While in the clock/compass mode,
press and hold the SET button for at
least 2 seconds. Language option will
be displayed.
Press the MODE button to scroll lan-
guage (English, French and Spanish).
Press the SET button to confirm the
desired language and return to the
clock/compass mode.
English/Metric Option
Press and hold both MODE and SET
buttons for at least 2 seconds. The
system will be automatically changed.
Chronometer
While in the chronometer mode, press
the SET button to start and stop the
chronometer.
Press the SET button for 2 seconds to
reset the chronometer.
Clock Adjustment
While in the clock/compass mode,
press and hold the MODE and SET
buttons for 2 seconds.
Press the MODE button to adjust the
hours and the SET button to adjust the
minutes.
Press again on the MODE and SET
buttons to return to the normal mode
(or it will return to the normal mode af-
ter 10 seconds).
Maintenance Information
When the craft is due for a maintenance
inspection, the message MAINT will
blink.
To clear the warning message, press
the SET button for 2 seconds during
the message blinking.
8) Speedometer
Analog speedometer indicates the
speed of craft in miles per hour (MPH)
and kilometers per hour (km/h).
NOTE: Info center gauge also indi-
cates craft speed.
The speed sensor mounted on the ride
plate sends the signal to the speedom-
eter and info center.
9) Fuel Tank Valve
A 3-position rotating valve: OFF, ON
and RESERVE:
OFF:Stop fuel supply to carburetor(s).
CAUTION: Turn valve to OFF posi-
tion when craft is not operated.
ON:Allows fuel to flow to carbure-
tor(s). This is the normal position
for operation of craft.
CAUTION: Improper opening of fuel
valve may restrict flow of fuel and
may lead to engine damage. Make
sure valve is fully opened while run-
ning.
RES: Use when the craft has run out of
fuel in the ON position.
Always refill the fuel tank at the first
opportunity. After refueling, turn the
fuel valve to the ON position to contin-
ue operation.
smo2000-001b.fm Page 23 Tuesday, May 4, 1999 1:20 PM
www.SeaDooManuals.net