Operating instructions

DAILY PRE-OPERATION CHECKS

Some of the following items may not have been previously covered in this guide,

however they will be described in the MAINTENANCE or SPECIAL PROCE-

DURES section. Please refer to these sections to have more detailed information.

Hull

Inspect hull for cracks or damage.

Jet Pump Water Intake

Remove weeds, shells, debris or any-

thing else that could restrict the flow

of water and damage cooling system

or propulsion unit. Clean as necessary.

If any obstruction can not be removed,

refer to an authorized Sea-Doo dealer

for servicing.

TYPICAL

1. Inspect this area

Inspect leading edges of the impeller,

if they have nicks or bends perfor-

mance will be greatly reduced.



WARNING

Safety lanyard should always be removed from its switch prior to verify-

ing any of the following.

ITEM OPERATION

Hull Inspect.

Jet pump water intake Inspect/clean.

Bilge Drain. Ensure plugs are secured.

Battery Inspect tightness of cables and retaining strap(s).

Fuel tank and oil reservoir Refill.

Engine compartment Verify for any fuel leak/odor.

Fire extinguisher Inspect condition/mounting.

Steering and throttle systems Check operation.

Reverse system Check operation.

Safety lanyard, engine

start/stop button

Check operation.

F01J3ZY

smo2000-001b.fm Page 33 Tuesday, May 4, 1999 1:20 PM