Operating instructions

36
TYPICAL
1. Shift lever in neutral position
TYPICAL
1. Reverse gate in middle position
To obtain reverse, pull shift lever com-
pletely. The reverse gate will be in
downward position, directing all the
thrust toward the front of the craft.
TYPICAL
1. Shift lever in reverse position
TYPICAL
1. Reverse gate in downward position
NOTE: To obtain maximum efficiency
and control from the reverse, increase
engine speed to slightly above idle.
Too much RPM will create water tur-
bulence and reduce reverse efficiency.
In reverse position, turn the handlebar
in the opposite direction that you want
to move the rear of the craft.

WARNING
When the craft is in neutral posi-
tion, the drive shaft and impeller
are turning.
F07L0RY
1
F07J0NY
1
F07L0SY
1
F07J0OY
1
smo2000-001b.fm Page 36 Tuesday, May 4, 1999 1:20 PM
www.SeaDooManuals.net